Sales and Service of Pumps, Motors, and Compressors Since 1918
CALL US 800/289-0500
Seattle: 206/762-0500 Spokane: 509/534-3559 Portland: 503/788-2850 Boise: 343-2076 Anchorage: 907/222-3200
Cascade Inventory Warehouse Dealers: Kodiak: 907/486-5350 Dutch Harbor: 907/581-2900 Naknek: 907/246-4230
Home / Products / Electric Motors / Electric Motor Controls / UM Series Servo Motor Control

UM Series Servo Motor Control


The UM control is an open chassis configuration designed to operate a wide range of Baldor's DC servo motors. The UM series typically contains from one to six servo control cards mounted onto a multi-axes chassis containing a power supply. Accepts industry standard +/- 10 Vdc input command for operation in either velocity or current mode. Models provide up to 6/15 amps continuous, with 15/30 amps peak. Easily interfaces to motion controllers. Protection for over/under voltage, over temperature, short circuit, etc.
  • Multi-axis servo control ' up to 6 axis
  • 6 and 15 amp continuous ' with peak = 2 times continuous
  • Models providing 100 and 150 volt bus
  • Easy interfaces with todays motion controllers
  • Simple easy adjustments
  • LED status indicators
  • Fully protected unit ' excessive current, voltage error, ground fault, surge current overtemperature
  • Available I/O ' overtravel, remote reset, enable, +/-15Vdc output, motor current monitor, externally adjustable current, differential or single ended, auxiliary command input.
  • Test points and reset button
  • Economical chassis mount configuration