• The SM Vector drive is designed for operation with vector duty rated induction motors rated for 200, 230, 400, 460, or 590VAC from 0 to 240Hz.
• IP20 enclosure with finger safe terminals
• Easy setup and operation – program the SM Vector drive one of four different ways:
– From the front of the drive
– The optional remote keypad
– A PC using the TechLink Software
– The EPM Programmer
• Modes of operation:
– Constant Torque V/Hz
– Variable Torque V/Hz
– Sensorless Vector – speed mode
– Sensorless Vector – torque mode
• Auto Tuning determines key performance values based on the motor and installation variables. Required for operation in vector modes, but can be used to enhance performance in V/Hz mode.
• The SM Vector drive is an approved thermal overload protection device for single motor applications
• 18 isolated terminals provide 5 logic inputs and two logic outputs
• Two reference inputs allow for 4-20mA and either 0-10V or bipolar
–10 to +10V
• Two analog outputs indicate speed and load
• Two wire RS485 serial communication
• Output frequency 0-240Hz
• Adjustable carrier frequency 2kHz to 8kHz
• Seven preset speeds
• Jog function – forward and reverse