Sales and Service of Pumps, Motors, and Compressors Since 1918
CALL US 800/289-0500
Seattle: 206/762-0500 Spokane: 509/534-3559 Portland: 503/788-2850 Boise: 343-2076 Anchorage: 907/222-3200
Cascade Inventory Warehouse Dealers: Kodiak: 907/486-5350 Dutch Harbor: 907/581-2900 Naknek: 907/246-4230
Home / Products / Pumps / Warren Rupp Pumps / Sandpiper Special Duty USDA Pump

Sandpiper Special Duty USDA Pump

Warren Rupp

Special Duty USDA Pumps are designed to meet United States Department of Agriculture (USDA) standards. Ball Valve pump sizes include:
  • SSB!-A 1-1/2 (38mm), 0 to 54 GPM (204 liters), handles solids to 1/4 (6mm), Top Discharge
  • SSB2-A 2 (50.8mm), 0 to 125 GPM (473 liters), handles solids to 1/4 (6mm), Top Discharge
  • SET1-A 1 (25.4mm), 0 to 54 GPM (204 liters), handles solids to 1/4 (6mm), Top Discharge
  • SET2-A 2 (50.8mm), 0 to 123 GPM (465 liters), handles solids to 1/4 (6mm), Top Discharge
 
Electronic Leak Detector - This leak detector works on the principle of conductance, sensing liquid or condensation entering the air side of the pump. It is installed through a boss on the inner chambers. A probe senses pooled conductive liquid, producing a low current (1.2 volt DC),which signals a control unit. Indicator lights signal not only contamination, but also which side is tainted. The control unit can be easily wired to an audible alarm or pump shutdown mechanism if needed. Modular, water-tight construction. Sensitivity range is adjustable from 500 ohms (2000 micro ohms) to 100.000 ohms (10 micro ohms). Available for 115V (032.017.000) and 220V (032.018.000) power supply. This unit must be purchased separately.