Sales and Service of Pumps, Motors, and Compressors Since 1918
CALL US 800/289-0500
Seattle: 206/762-0500 Spokane: 509/534-3559 Portland: 503/788-2850 Boise: 343-2076 Anchorage: 907/222-3200
Cascade Inventory Warehouse Dealers: Kodiak: 907/486-5350 Dutch Harbor: 907/581-2900 Naknek: 907/246-4230
Home / Pumps V2 / Deming V2 / Vertical Process Pump by Deming

Vertical Process Pump by Deming

Deming

Deming Vertical Process pumps are space saving, always primed, with cantilever shaft, no submerged bearings, and broad capacity range.
 
Applications:
  • Coolants
  • Metal and Parts Washing
  • Filtering
  • Air Conditioning
  • Pickling
  • Circulation
  • Paint Systems Plating
  • Air Washers
  • Pollution Control

Features:
Casing - Vertically split, end suction design. Double volute type on pumps with 3” and larger discharge.

Impeller - Series 5560 pumps have semi-open type impeller with heavy vanes for outstanding performance. Back pump-out vanes on a semi-open impeller reduces pressure behind the impeller and limits axial thrust.

Power Frame - Heavy duty, one piece cast iron, precision bored and machined to assure alignment of the rotating assembly. Series 43 10-11 pumps are short set design. Series 5560 are available in 9”, 1 2”, and 1 5” extension lengths below the support plate.

Shaft - High strength shaft is extra heavy for maximum loads with minimum deflection. Impeller is keyed to shaft and locked with impeller nut or large cap screw.