Sales and Service of Pumps, Motors, and Compressors Since 1918
CALL US 800/289-0500
Seattle: 206/762-0500 Spokane: 509/534-3559 Portland: 503/788-2850 Boise: 343-2076 Anchorage: 907/222-3200
Cascade Inventory Warehouse Dealers: Kodiak: 907/486-5350 Dutch Harbor: 907/581-2900 Naknek: 907/246-4230
Home / Pumps V2 / Roper Pump V2 / Roper Pump Flow Dividers

Roper Pump Flow Dividers

Roper

Why you should upgrade to a DuraFlow™ flow divider:
  • Will not rust
  • Resists seizure induced by leaking check valves
  • Liquid fuel startups and transfers without problems
  • Well suited for low-viscosity, low-lubricity liquid fuels
  • Tolerant of small fuel-borne particulates
  • DuraFlow™ flow divider models available to replace any traditional cast iron fl ow divider

  

 

Key Features:

  • Stainless steel housings
  • Bronze cases
  • Replaceable wearplates (bronze or other)
  • Stainless steel internals (gears, bearings, shafts)
  • All wetted surfaces are protected from corrosion
  • 6 to 20 precision machined flow elements for equally metered fuel delivery
  • With or without speed sensors
  • With or without starter motor
  • Custom designed to operate in site-specific conditions
Flow Divider Features & Accessories:
  • Flow dividers are critical in multi chamber combustion systems to deliver precise and equal flow of liquid fuel into each combustion cans.
  • Flow dividers are designed with precision machined positive displacement gear flow elements, assembled in a circular or a linear (stacked) orientation.
  • Linear designs have one to three inlets and circular designs have only one inlet.
  • Flow divider built with as many as 20 flow elements (i.e. 20 discharges).
  • Years of combined experience running on distillates, heavy fuels and crude oil, kerosene, naphtha, and fuels with abrasives.
  • As part of a continuous program of improving the reliability of new flow dividers, all internal components, including the ball and roller bearings, are made of stainless steel materials for improved corrosion resistance. Older flow dividers can be upgraded with the new stainless steel components.
  • Very low breakaway pressures make starter motors/gear reducers unnecessary, but are optional and available upon request with any voltage and specification.
  • Speed pickup wheels are optional and flow dividers may carry one, two or three wheels.
  • Provisions for magnetic pickups are optional with as many as 5 pickup provisions available upon request. Both active and inactive speed pickups may be installed and covers are available to protect the pickup leads from damage or incorrect assembly.
  • Most of the flow dividers are repairable at one of the four repair facilities.