Sales and Service of Pumps, Motors, and Compressors Since 1918
CALL US 800/289-0500
Seattle: 206/762-0500 Spokane: 509/534-3559 Portland: 503/788-2850 Boise: 343-2076 Anchorage: 907/222-3200
Cascade Inventory Warehouse Dealers: Kodiak: 907/486-5350 Dutch Harbor: 907/581-2900 Naknek: 907/246-4230
Home / Compressed Air V2 / Summit Industrial Products V2 / Summit Syngear SH 7000 Gear Lubricant

Summit Syngear SH 7000 Gear Lubricant


Summit Syngear SH® 7000 Series synthetic gear lubricants are formulated using synthesized hydrocarbon fluid and select additives to enhance oxidation resistance and provide maximum protection against wear, rust, corrosion and foaming.  These synthesized hydrocarbon fluids (SHF) provide significantly better thermal and oxidation stability, as well as increased protection against the loss of viscosity than do conventional good quality mineral oils. The high inherent viscosity index of these oils provides higher viscosities and therefore greater film thickness at higher temperatures and lower viscosities for easy start-up and minimal internal friction at lower temperatures.  The low coefficient of friction of the Summit Syngear SH® Series lubricants substantially reduce power consumption and gearbox operating temperature, further prolonging the useable life of this lubricant.

Summit Syngear SH Series lubricants are recommended for use under severe high or low temperature conditions when lubricating industrial enclosed gears and heavily loaded plain or roller element bearings.  They are particularly recommended for applications where high oil temperatures result in short oil life or high maintenance costs.  Summit Syngear SH®-7032 through Syngear SH®-71000 are also recommended for use in applications where the corrosion of yellow metals is a concern as these lubricants do not contain additives which tend to attack metals such as brass, bronze or copper.

The Summit  Syngear SH®-Series lubricants are compatible with essentially all seal materials, plastics and paint, including nitrile Buna N, neoprene, Viton®, teflon, polyethylene, polyurethane ether, fluorocarbon, polyacrylate, polysulfate, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer.