Cascade Machinery & Electric, Inc. Cascade Machinery & Electric, Inc Sales and Service of Pumps, Motors and Compressors since 1918 Get a Quote
Home / Compressed Air / Quincy / Dryers / QHP Heated Purge Desiccant Dryer
QHP Heated Purge Desiccant Dryer

Quincy

QHP Heated Purge Desiccant Dryer

Get a Quote
  

QHP Heated Purge Desiccant Dryer

The QHP series of heated desiccant dryers features a built-in heating system that regenerates the offline tower using half the amount of air as our heatless products. This translates to improved efficiency, less wear and lower operating costs overall.

Nine configurations are available that can deliver between 850 and 3,400 CFM of dry air at 100 psig. Key components include the same high-performance switching valve system found in the QHD and a heavy-duty steel base. From the ground up, the QHD has been designed to ensure long life and low maintenance requirements, even when operating at high temperatures.

Operation is similar to the QHD, with the distinction that purged air passes through a heater before beginning the regeneration process. Because the air is hotter, less is required to absorb moisture from the desiccant beads. Air is forced through the system at a maximum of 50 feet/second, with up to 5.5 seconds of desiccant contact time during the drying phase.

QHP industrial desiccant air dryers run on an eight-hour NEMA cycle. The drying phase lasts four hours, the heating phase two and a half hours, the cooling phase one hour and twenty minutes and the re-pressurizing phase 10 minutes.

The QHP is available with the optional Quincy MicroBurst Regeneration (MBR) system, the only full-load energy saver available for use with heated purge desiccant air dryers. The MBR cuts purge requirements in half and greatly reduces heater “on” time. When equipped with the Quincy MBR, our Heated Purge dryers use 50% less energy. ROI can be realized within five months depending on dryer size and local power costs.

Initial cost: Moderate

Operating cost: Moderately low

Maintenance cost: Low

-40° to -100°F dew point

850 – 3,400 cfm

3.5% to 7% purge

Low-watt density heaters

Twitter Facebook Linked In Google+
Seattle:(206)762-0500Spokane:(509)534-3559Portland:(503)788-2850Boise:(208)343-2076Cascade Inventory Warehouse Dealers:Kodiak:(907)486-5350Dutch Harbor:(907)581-2900

PROUD MEMBERS OF:Alaska Crab Coalition|APA(At-Sea Processors Association) |EASA(Electrical Apparatus Service Association) |Groundfish Forum|NECA(National Contractors Association)|NW Salmon Canners AssociationWashington Ferry Coalition